< >

VELCRO® Extreme Outdoor Tape Strips

Name: VELCRO® Extreme Outdoor Tape Strips
Brand: VELCRO®
SKU: VEK90812

4" Length x 1" Width - Polyester - Water Resistant, UV Resistant - For Brick, Wood, Concrete - 10 / Carton - Gray, Titanium

Product Code: VEK90812

Product Unit: PK10

42 Stock Available

Holds up to 10 lbs. (1 lb. per 1" square)
NO TOOLS REQUIRED: No hammer, drilling, nails, or epoxy necessary; a simple solution to organize on many surfaces without putting holes in the wall
For use in extreme temps, from -40*-194*
Ideal option when 50% more strength is needed for keeping things organized and connected

Manufacturer	Velcro Companies
Manufacturer Part Number	90812
Manufacturer Website Address	http://www.velcro.com
Brand Name	VELCRO®
Product Line	Extreme
Product Name	Extreme Outdoor Tape Strips
Marketing Information	Adhesive sticks to most rough surfaces such as brick, wood, concrete and more and requires time for adhesive to set before mating the hook and loop so you have time to reposition. Adhesive is also water-resistant. Extreme tape is designed for permanently placing items. More from the Manufacturer
Packaged Quantity	10 / Carton
Product Type	Hook & Loop Fastener

Durability	Water Resistant UV Resistant

Product Color	Gray Titanium
Product Material	Polyester

Additional Information	Shape: Strips Care and Application: Instructions: Clean and dry surface before application Peel tape from fastener and press firmly into place Adhesive reaches maximum strength after 24 hours Note: Recommended for temperatures between 0°F to 140°F. Not recommended for fabrics, dashboards, flexible vinyl or underwater use. Continued exposure to full sunlight can damage fastener. May not adhere well to certain types of brick - testing is recommended. Removal Instructions: Warm the tape (Hook or Loop) with a hair dryer. (Do not use a heat gun) Peel off the tape (Hook or Loop) the adhesive will remain on the substrate Warm the adhesive with the hair dryer (again, do not use a heat gun), peel off a piece and roll in a ball Cool the adhesive down. This may be done with ice in a plastic bag (only takes a few moments) Stick the ball on the adhesive which is on your substrate and pull it off Repeat step # 5 until the adhesive is completely removed from the substrate. This may take some time If any residue tackiness remains on the substrate you may now use a commercial remover like Goo Gone, acetone, WD-40, mineral spirits or citrus based cleaners Weight Rating: 1 lbs per square inch up to 15 lbs Functional Temperature Range: 0-140° F (-18-60° C)
Recycled	No
Assembly Required	No
Country of Origin	United States